# go to download directory admins-MacBook-Pro-7:~ insar$ cd Downloads/ # unpack ROI_pac source code admins-MacBook-Pro-7:Downloads insar$ tar xvf roi_pac_3_1beta.tgz x ROI_PAC_3_1beta/ x ROI_PAC_3_1beta/.DS_Store x ROI_PAC_3_1beta/AAREADME x ROI_PAC_3_1beta/Delft/ x ROI_PAC_3_1beta/DGX_MDX/ x ROI_PAC_3_1beta/FFTW/ x ROI_PAC_3_1beta/ROI_PAC/ x ROI_PAC_3_1beta/ROI_PAC/AAREADME_BUILD_ROIPAC … # go to ROI_pac directory admins-MacBook-Pro-7:Downloads insar$ cd ROI_PAC_3_1beta/ admins-MacBook-Pro-7:ROI_PAC_3_1beta insar$ ls AAREADME DGX_MDX Delft FFTW ROI_PAC admins-MacBook-Pro-7:ROI_PAC_3_1beta insar$ cd ROI_PAC/ admins-MacBook-Pro-7:ROI_PAC insar$ ls AAREADME_BUILD_ROIPAC README intsim AUTHORS TESTING inverse3d COPYING aclocal.m4 jers_codes ChangeLog autofocus log1 DOC autom4te.cache m4 INSTALL baseline match INT_SCR combine missing LIB config.h.in mkinstalldirs Makefile.am configure rect Makefile.am.common configure.ac resamp_roi Makefile.in contrib roi Math depcomp sch_to_dem NEWS fip simulation OUR_SCR icu unwrap PROC_FILES install-sh util # build FFTW libraries admins-MacBook-Pro-7:ROI_PAC insar$ ./contrib/install-fftw.sh Doing: curl -O ftp://ftp.fftw.org/pub/fftw/fftw-3.2.2.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 3413k 100 3413k 0 0 374k 0 0:00:09 0:00:09 --:--:-- 417k Doing: tar xzf /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetDist/fftw-3.2.2.tar.gz Doing: configure --enable-float --prefix=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426 make install (This may take a few minutes.) Looks like build was successful. To setup your environment for multibuild.sh export FFTW_LIB_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/lib export FFTW_INC_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/include or setenv FFTW_LIB_DIR /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/lib setenv FFTW_INC_DIR /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/include # set environment variables for locations of built FFTW libraries and include files # should also add to "SAR_CONFIG" file admins-MacBook-Pro-7:ROI_PAC insar$ export FFTW_LIB_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/lib admins-MacBook-Pro-7:ROI_PAC insar$ export FFTW_INC_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/include # build ROI_pac executables admins-MacBook-Pro-7:ROI_PAC insar$ ./contrib/multibuild.sh Will configure using /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/configure Doing builds in multibuild-110808-1443 common_options are >LDFLAGS=-L/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/lib#CPPFLAGS=-I/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-110808-1426/include< installation directory is /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs DON'T PANIC! Failed builds are expected for compilers you do not have installed. Starting >defaults< build with options >-verbose< Build >defaults< succeeded. Starting >ifort< build with options >FC=ifort#FCFLAGS=-O2< Build >ifort< failed. See multibuild-110808-1443/ifort-build-log Starting >g95< build with options >FC=g95#FCFLAGS=-O2 -i4< Build >g95< failed. See multibuild-110808-1443/g95-build-log Starting >pgf95< build with options >FC=pgf95#FCFLAGS=-O2< Build >pgf95< failed. See multibuild-110808-1443/pgf95-build-log Starting >gfortran< build with options >FC=gfortran#FCFLAGS=-O2< Build >gfortran< succeeded. Starting >f90< build with options >FC=f90#FCFLAGS=-O2< Build >f90< failed. See multibuild-110808-1443/f90-build-log Starting >f90nc< build with options >FC=f90#FCFLAGS=-O2 -ftrap=%none< Build >f90nc< failed. See multibuild-110808-1443/f90nc-build-log Starting >f90cc< build with options >FC=f90#FCFLAGS=-O2#CC=cc< Build >f90cc< failed. See multibuild-110808-1443/f90cc-build-log Starting >xlf< build with options >FC=xlf#FCFLAGS=-O2< Build >xlf< failed. See multibuild-110808-1443/xlf-build-log Starting >ifort-g< build with options >FC=ifort#FCFLAGS=-g< Build >ifort-g< failed. See multibuild-110808-1443/ifort-g-build-log Starting >g95-g< build with options >FC=g95#FCFLAGS=-g -i4< Build >g95-g< failed. See multibuild-110808-1443/g95-g-build-log Starting >pgf95-g< build with options >FC=pgf95#FCFLAGS=-g< Build >pgf95-g< failed. See multibuild-110808-1443/pgf95-g-build-log Starting >gfortran-g< build with options >FC=gfortran#FCFLAGS=-g< Build >gfortran-g< succeeded. Starting >f90-g< build with options >FC=f90#FCFLAGS=-g< Build >f90-g< failed. See multibuild-110808-1443/f90-g-build-log Starting >xlf-g< build with options >FC=xlf#FCFLAGS=-g< Build >xlf-g< failed. See multibuild-110808-1443/xlf-g-build-log Starting >f90cc-g< build with options >FC=f90#FCFLAGS=-g#CC=cc#CFLAGS=-g< Build >f90cc-g< failed. See multibuild-110808-1443/f90cc-g-build-log Starting >CCFFT< build with options >FCFLAGS=-DHAVE_CCFFT#LIBS=-lscs#--without-fftw< Build >CCFFT< failed. See multibuild-110808-1443/CCFFT-build-log Starting >CFFT1D< build with options >FCFLAGS=-O2 -DHAVE_CFFT1D#LIBS=-lcomplib.sgimath#--without-fftw#CC=cc#CFLAGS=-O2< Build >CFFT1D< failed. See multibuild-110808-1443/CFFT1D-build-log Starting >CFFTF< build with options >FCFLAGS=-fast -xvector=no -DHAVE_CFFTF#LIBS=-lsunperf#--without-fftw#CC=cc#CFLAGS=-fast< Build >CFFTF< failed. See multibuild-110808-1443/CFFTF-build-log Starting >C1DFFT< build with options >FCFLAGS=-DHAVE_C1DFFT#LIBS=-lveclib#--without-fftw< Build >C1DFFT< failed. See multibuild-110808-1443/C1DFFT-build-log Starting >gfortran64< build with options >FC=gfortran#FCFLAGS=-O2 -m64#CC=cc#CFLAGS=-O2 -m64< Build >gfortran64< succeeded. Starting >gfortran64-g< build with options >FC=gfortran#FCFLAGS=-g -m64#CC=cc#CFLAGS=-g -m64< Build >gfortran64-g< succeeded. Starting >f90cc64< build with options >FC=f90#FCFLAGS=-O2 -64#CC=cc#CFLAGS=-O2 -64< Build >f90cc64< failed. See multibuild-110808-1443/f90cc64-build-log Starting >f90cc64-g< build with options >FC=f90#FCFLAGS=-g -64#CC=cc#CFLAGS=-g -64< Build >f90cc64-g< failed. See multibuild-110808-1443/f90cc64-g-build-log Be patient waiting for some builds to succeed. Fully completed build binaries are in: /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/defaults/bin /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran-g/bin /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran64-g/bin /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran64/bin Perl scripts (which are common to all sets of binaries) are in: /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/share/roi_pac See README_ROI_BUILD for information on how to run contrib/multitest.sh to do test runs using data from TEST_DIR.tar # set environment variables for ROI_pac binaries and scripts # also add to SAR_CONFIG!!! admins-MacBook-Pro-7:ROI_PAC insar$ export INT_BIN=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin admins-MacBook-Pro-7:ROI_PAC insar$ export INT_SCR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/share/roi_pac # go back to download directory admins-MacBook-Pro-7:ROI_PAC insar$ pwd /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC admins-MacBook-Pro-7:ROI_PAC insar$ cd ../.. admins-MacBook-Pro-7:Downloads insar$ ls About Downloads.pdf fftw-3.2.2.tar.gz ENV1_2_084_2961_41721.baq gcc-snwleo-intel-bin.tar.gz ENV1_2_084_2961_42723.baq gfortran-snwleo-intel-bin.tar.gz Envisat h5py-1.3.1 InSARPrinciplesTheory_UNAVCO_11.pdf h5py-1.3.1.tar.gz MDX installation-steps (Autosaved).txt MacPorts-2.0.0-10.6-SnowLeopard.dmg installation-steps.txt ROI_PAC_3_0_1 netcdf-4.1.3 ROI_PAC_3_0_1.tgz netcdf-4.1.3.tar.gz ROI_PAC_3_1beta numpy-1.6.1 SAR_CONFIG-gfortran.txt numpy-1.6.1.tar.gz SAR_CONFIG-gfortran_v3_1.txt roi_pac_3_1beta.tgz TEST_DIR roi_pac_testdir.tar.gz fftw-3.2.2 rp_test_download.html ################ ready for testing ############ # source the SAR_CONFIG admins-MacBook-Pro-7:Downloads insar$ source SAR_CONFIG-gfortran_v3_1.txt # unpack test data admins-MacBook-Pro-7:Downloads insar$ tar zxvf roi_pac_testdir.tar.gz x ./TEST_DIR/ x ./TEST_DIR/930110/ x ./TEST_DIR/930110/IMAGERY1993011018252739T1Of3 x ./TEST_DIR/930110/SARLEADER1993011018252739T1Of1 x ./TEST_DIR/930110/VDF1993011018252739T1 x ./TEST_DIR/950523/ x ./TEST_DIR/950523/IMAGERY1995052318253409T1Of3 x ./TEST_DIR/950523/SARLEADER1995052318253409T1Of1 x ./TEST_DIR/950523/VDF1995052318253409T1 x ./TEST_DIR/AAREADME x ./TEST_DIR/DEM/ x ./TEST_DIR/DEM/SoCal.dem x ./TEST_DIR/DEM/SoCal.dem.rsc x ./TEST_DIR/DEM/SoCal.dem.org x ./TEST_DIR/DEM/SoCal.dem.hdr x ./TEST_DIR/DEM/SoCal.dem.pc_byte_order x ./TEST_DIR/DEM/SoCal.dem.pc_byte_order.hdr x ./TEST_DIR/DEM/SoCal.dem.nonpc_byte_order x ./TEST_DIR/Makefile x ./TEST_DIR/PRC/ x ./TEST_DIR/PRC/ERS1/ x ./TEST_DIR/PRC/ERS1/PRC_930109_07776_rev2.Z x ./TEST_DIR/PRC/ERS1/PRC_950521_20115_rev2.Z x ./TEST_DIR/PRC/ERS1/arclist x ./TEST_DIR/int.proc x ./TEST_DIR/roi.proc # go into test directory admins-MacBook-Pro-7:Downloads insar$ cd TEST_DIR/ admins-MacBook-Pro-7:TEST_DIR insar$ ls 930110 AAREADME Makefile int.proc 950523 DEM PRC roi.proc # go to 1993 image directory admins-MacBook-Pro-7:TEST_DIR insar$ cd 930110/ admins-MacBook-Pro-7:930110 insar$ ls IMAGERY1993011018252739T1Of3 SARLEADER1993011018252739T1Of1 VDF1993011018252739T1 ##### make raw data from ERS data product # get usage admins-MacBook-Pro-7:930110 insar$ make_raw.pl Usage: make_raw.pl orbit_type leader_file date [facility] [reference_counter] facility: processing facility reference_counter: default is read from imagery file Function: Creates I.raw and I.raw.rsc from imagery files *** Last Update Oct 06, 1999 *** For more info see http://roipac.org *** This software is part of the ROI_PAC suite. *** Licensed software, not for general distribution. # run make_raw admins-MacBook-Pro-7:930110 insar$ make_raw.pl PRC SARLEADER1993011018252739T1Of1 930110 +make_raw.pl Checking I/O Creating 930110.raw Creating 930110.raw.rsc +make_raw.pl General definitions +make_raw.pl Getting facility name +make_raw.pl Finding reference counter, pri and prf counter read: 900 swst offset read: 204 +make_raw.pl Reference counter = 900 +make_raw.pl Checking line number +make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/new_parse 12060 200 4 1 IMAGERY1993011018252739T1Of3 tmp_IMAGERY.raw 12000 +make_raw.pl Reading the leader file +make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/leader2rsc SARLEADER1993011018252739T1Of1 /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/share/roi_pac/format_leaderfile_CRDC-SARDPF tmp_IMAGERY.raw.rsc +make_raw.pl Reading the imagery file +make_raw.pl Setting the starting range +make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/delay_shift tmp_IMAGERY.raw tmp_IMAGERY.new shift.out 204 900 12060 412 11636 0 0 shifting line 0 shifting line 10000 +make_raw.pl Writing the imagery resource file +make_raw.pl Reading state vectors in SARLEADER's header, Building hdr_data_points_930110 file +make_raw.pl Using Orbit Information +make_raw.pl Doppler Computation +make_raw.pl Raw data ready for processing admins-MacBook-Pro-7:930110 insar$ ls 930110.raw VDF1993011018252739T1 log1 930110.raw.rsc dop.mod shift.out 930110_parse_line.out dop.out shift.out.rsc IMAGERY1993011018252739T1Of3 dop.unw shift.out.rsc.hst RscDocDir hdr_data_points_930110.rsc tmp_IMAGERY.raw.rsc.hst SARLEADER1993011018252739T1Of1 log tmp_poly.rsc.hst # go to 1995 image directory admins-MacBook-Pro-7:930110 insar$ cd ../950523/ # run make_raw on 1995 scene admins-MacBook-Pro-7:950523 insar$ make_raw.pl PRC SARLEADER1995052318253409T1Of1 950523 +make_raw.pl Checking I/O Creating 950523.raw +make_raw.pl General definitions +make_raw.pl Getting facility name +make_raw.pl Finding reference counter, pri and prf counter read: 900 swst offset read: 204 +make_raw.pl Reference counter = 900 +make_raw.pl Checking line number +make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/new_parse 12060 200 4 1 IMAGERY1995052318253409T1Of3 tmp_IMAGERY.raw 12000 +make_raw.pl Reading the leader file +make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/leader2rsc SARLEADER1995052318253409T1Of1 /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/share/roi_pac/format_leaderfile_CRDC-SARDPF tmp_IMAGERY.raw.rsc +make_raw.pl Reading the imagery file +make_raw.pl Setting the starting range +make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/delay_shift tmp_IMAGERY.raw tmp_IMAGERY.new shift.out 204 900 12060 412 11636 0 0 shifting line 0 shifting line 10000 +make_raw.pl Writing the imagery resource file +make_raw.pl Reading state vectors in SARLEADER's header, Building hdr_data_points_950523 file +make_raw.pl Using Orbit Information +make_raw.pl Doppler Computation +make_raw.pl Raw data ready for processing admins-MacBook-Pro-7:950523 insar$ ls 950523.raw VDF1995052318253409T1 log1 950523.raw.rsc dop.mod shift.out 950523_parse_line.out dop.out shift.out.rsc IMAGERY1995052318253409T1Of3 dop.unw shift.out.rsc.hst RscDocDir hdr_data_points_950523.rsc tmp_IMAGERY.raw.rsc.hst SARLEADER1995052318253409T1Of1 log tmp_poly.rsc.hst # go back to main directory admins-MacBook-Pro-7:950523 insar$ cd .. admins-MacBook-Pro-7:TEST_DIR insar$ ls 930110 AAREADME Makefile int.proc 950523 DEM PRC roi.proc ### edit the int.proc file to have path to this DEM directory! # like this: # DEM=/Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem ### run processing with process_2pass.pl script admins-MacBook-Pro-7:TEST_DIR insar$ process_2pass.pl int.proc +process_2pass.pl Read the inputfile +process_2pass.pl Define Variables +process_2pass.pl Go from raw to slc to int and cor (also flattens with orbits) +raw2ampintcor.pl Check Doppler values +dopav.pl Checking I/O Creating /Users/insar/Downloads/TEST_DIR/930110/roi.dop.rsc Creating /Users/insar/Downloads/TEST_DIR/950523/roi.dop.rsc +dopav.pl Reading the imagery files.raw.rsc +dopav.pl Creating the files roi.dop.rsc +dopav.pl just before SL_AZIMUT_RESOL +dopav.pl just after SL_AZIMUT_RESOL +dopav.pl just before SL_AZIMUT_RESOL +dopav.pl just after SL_AZIMUT_RESOL +raw2ampintcor.pl Make ROI Input Files +roi_prep.pl Read the inputfile +roi_prep.pl Checking I/O Creating 930110_roi.in Creating 930110.slc.rsc +roi_prep.pl setting roi default +roi_prep.pl Reading resource file: 930110.raw.rsc Keyword RANGE_OFFSET doesn't exist in 930110.raw.rsc, returning 0 +roi_prep.pl Computing parameters +roi_prep.pl chirp length in samples 704 +roi_prep.pl Azimuth patch length 4096 +roi_prep.pl Synthetic aperture length in samples 1101 +roi_prep.pl Writing resource file: 930110.slc.rsc +roi_prep.pl Writing roi input file: 930110_roi.in +roi_prep.pl Read the inputfile +roi_prep.pl Checking I/O Creating 950523_roi.in Creating 950523.slc.rsc +roi_prep.pl setting roi default +roi_prep.pl Reading resource file: 950523.raw.rsc Keyword RANGE_OFFSET doesn't exist in 950523.raw.rsc, returning 0 +roi_prep.pl Computing parameters +roi_prep.pl chirp length in samples 704 +roi_prep.pl Azimuth patch length 4096 +roi_prep.pl Synthetic aperture length in samples 1101 +roi_prep.pl Writing resource file: 950523.slc.rsc +roi_prep.pl Writing roi input file: 950523_roi.in +raw2ampintcor.pl Make Baseline files +baseline.pl Checking I/O Creating 930110_950523_baseline.rsc +baseline.pl Reading resource file: 930110.slc.rsc +baseline.pl Reading resource file: 950523.slc.rsc lookangle 16.573978269859 +baseline.pl Getting orbital parameters +baseline.pl Calculating baseline +baseline.pl Printing to file 930110_950523_baseline.rsc +raw2ampintcor.pl Running ROI Starting ROI 1 +roi.pl Checking I/O Creating 930110.slc +roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/roi 930110_roi.in > 930110_roi.out +roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/share/roi_pac/length.pl 930110.slc +look.pl Checking I/O Creating 930110_16rlks.slc Creating 930110_16rlks.slc.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine Starting ROI 2 +roi.pl Checking I/O Creating 950523.slc +roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/roi 950523_roi.in > 950523_roi.out +roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/share/roi_pac/length.pl 950523.slc +look.pl Checking I/O Creating 950523_16rlks.slc Creating 950523_16rlks.slc.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +raw2ampintcor.pl Get offsets +make_offset.pl Checking I/O Creating 930110-950523_ampcor.off Creating 930110-950523_ampcor.off.rsc +make_offset.pl Reading resource file: 930110_950523_baseline.rsc +offset.pl Checking I/O Creating 930110-950523_ampcor_gross.off Creating 930110-950523_ampcor_gross.in Creating 930110-950523_ampcor_gross.out +offset.pl Reading resource file: 930110.slc.rsc +offset.pl Reading resource file: 950523.slc.rsc +offset.pl Writing resource file: 930110-950523_ampcor_gross.off.rsc +offset.pl Writing input_file: 930110-950523_ampcor_gross.in +offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/ampcor 930110-950523_ampcor_gross.in rds > 930110-950523_ampcor_gross.out +make_offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/fitoff 930110-950523_ampcor_gross.off 930110-950523_cull_gross.off 1.5 0.5 10 > fitoff_ampcor_gross.out +make_offset.pl 311 points left after culling +make_offset.pl extracting affine transformation parameters from gross match +make_offset.pl Fine Matching and Culling +offset.pl Checking I/O Creating 930110-950523_ampcor.in Creating 930110-950523_ampcor.out +offset.pl Reading resource file: 930110.slc.rsc +offset.pl Reading resource file: 950523.slc.rsc +offset.pl Writing resource file: 930110-950523_ampcor.off.rsc +offset.pl Writing input_file: 930110-950523_ampcor.in +offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/ampcor 930110-950523_ampcor.in rds > 930110-950523_ampcor.out +make_offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/fitoff 930110-950523_ampcor.off 930110-950523_cull.off 1.5 0.08 50 > fitoff_ampcor.out +raw2ampintcor.pl Do the interferogram +resamp.pl Checking I/O Creating 930110-950523.int Creating 930110-950523.int.rsc Creating 930110-950523.amp Creating 930110-950523.amp.rsc +resamp.pl Reading resource files: 930110.slc.rsc and 950523.slc.rsc +resamp.pl Computing new lengths +resamp.pl Writing resource file: 930110-950523.int.rsc +resamp.pl Writing resource file: 930110-950523.amp.rsc +resamp.pl Writing resamp input file: 930110-950523_resamp.in +raw2ampintcor.pl Flattening with orbits +add_rmg.pl Checking I/O Creating reference.hgt Creating reference.hgt.rsc +add_rmg.pl Adding back +add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/add_rmg junk.unw \ junk.unw \ reference.hgt \ 5700 \ 2593 \ -1 \ 0 +diffnsim.pl Checking I/O Creating flat_PRC_930110-950523.int Creating flat_PRC_930110-950523.int.rsc Creating ramp_PRC.unw Creating ramp_PRC.unw.rsc +diffnsim.pl Reading resource file: 930110-950523.int.rsc +diffnsim.pl Reading resource file: reference.hgt.rsc Keyword HEADING_DEG doesn't exist in reference.hgt.rsc, returning 0 Keyword RGE_REF1 doesn't exist in reference.hgt.rsc, returning 0 +diffnsim.pl Writing resource file: flat_PRC_930110-950523.int.rsc +diffnsim.pl Running diffnsim +diffnsim.pl no masking applied +look.pl Checking I/O Creating flat_PRC_930110-950523_4rlks.int Creating flat_PRC_930110-950523_4rlks.int.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +look.pl Checking I/O Creating ramp_PRC_4rlks.unw Creating ramp_PRC_4rlks.unw.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +look.pl Checking I/O Creating reference_4rlks.hgt Creating reference_4rlks.hgt.rsc +look.pl Wrote new rscfile Keyword AZIMUTH_PIXEL_GROUND doesn't exist in reference.hgt.rsc, returning 0 +look.pl Using lookdown routine +raw2ampintcor.pl Calculate Correlation File +make_cor.pl Checking I/O Creating 930110-950523.cor Creating 930110-950523.cor.rsc +make_cor.pl Reading resource file: flat_PRC_930110-950523.int.rsc +make_cor.pl Writing resource file: 930110-950523.cor.rsc +make_cor.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/cchz_wave flat_PRC_930110-950523.int 930110-950523.amp 930110-950523.cor 5700 5 #lines in the interferogram file: 2593 processing line: 2590+look.pl Checking I/O Creating 930110-950523_4rlks.cor Creating 930110-950523_4rlks.cor.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +look.pl Checking I/O Creating 930110-950523_16rlks.cor Creating 930110-950523_16rlks.cor.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +replace_mag.pl cpx2mag_phs flat_PRC_930110-950523_4rlks.int /dev/null phs 1425 line 600+replace_mag.pl rmg2mag_phs 930110-950523_4rlks.cor pwr /dev/null 1425 line 600+replace_mag.pl mag_phs2cpx pwr phs flat_PRC_930110-950523_4rlks.int 1425 line 600+process_2pass.pl Making the Simulation for baseline reestimation and 2 pass approach +look.pl Checking I/O look.pl already done +dem2diff.pl Making the Simulation for baseline reestimation and 2 pass approach +make_sim.pl Checking I/O Creating /Users/insar/Downloads/TEST_DIR/SIM/SIM_4rlks.hgt.rsc Creating /Users/insar/Downloads/TEST_DIR/SIM/SIM_4rlks.hgt +make_sim.pl Reading resource file: 930110-950523.int.rsc +make_sim.pl Building ORRM file +make_sim.pl Reading resource file: /data1/par/ROI_PAC_DIST/TEST_DIR/DEM/SoCal.dem.rsc Keyword DATUM doesn't exist in /Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem.rsc, returning 0 +make_sim.pl Creating slope file +gradient.pl Checking I/O Creating /Users/insar/Downloads/TEST_DIR/DEM/SoCal.slp Creating /Users/insar/Downloads/TEST_DIR/DEM/SoCal.slp.rsc +gradient.pl Reading resource file: /Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem.rsc +gradient.pl Writing resource file: /Users/insar/Downloads/TEST_DIR/DEM/SoCal.slp.rsc +gradient.pl Writing Gradient.in +gradient.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/Gradient Gradient.in +make_sim.pl Writing resource file: SIM_raw.hgt.rsc +make_sim.pl Writing IntSim input_file: IntSim.in +make_sim.pl IntSim IntSim.in > IntSim.out +make_sim.pl Writing Aik_resample input_file: Aik_resample.in +make_sim.pl Doing looked down height map +look.pl Checking I/O Creating SIM_16rlks.hgt Creating SIM_16rlks.hgt.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +synth_offset.pl Checking I/O Creating ampmag_cull.off +synth_offset.pl Getting gross offset +offset.pl Checking I/O Creating ampmag_gross.off Creating ampmag_gross.in Creating ampmag_gross.out +offset.pl Reading resource file: 930110-950523_4rlks.cor.rsc +offset.pl Reading resource file: SIM_4rlks.hgt.rsc +offset.pl Writing resource file: ampmag_gross.off.rsc +offset.pl Writing input_file: ampmag_gross.in +offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/ampcor ampmag_gross.in rds > ampmag_gross.out +synth_offset.pl Culling gross offset +synth_offset.pl Getting the fine offset +offset.pl Checking I/O Creating ampmag.off Creating ampmag.in Creating ampmag.out +offset.pl Reading resource file: 930110-950523_4rlks.cor.rsc +offset.pl Reading resource file: SIM_4rlks.hgt.rsc +offset.pl Writing resource file: ampmag.off.rsc +offset.pl Writing input_file: ampmag.in +offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/ampcor ampmag.in rds > ampmag.out +synth_offset.pl Culling points 646 points left after culling +dem2diff.pl Morphing simulation and doing 2-pass +synth2radar.pl Checking I/O Creating 930110-950523_4rlks_SIM.aff +synth2radar.pl Registering the height map to the radar +rect.pl Believes input file is RMG format +rect.pl Using Bilinear to interpolate +rect.pl Checking I/O Creating radar_4rlks.hgt +rect.pl Registering to the simulation +rect.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/rect rect.in +diffnsim.pl Checking I/O Creating 930110-950523-sim_PRC_4rlks.int Creating 930110-950523-sim_PRC_4rlks.int.rsc Creating radar_PRC_4rlks.unw Creating radar_PRC_4rlks.unw.rsc +diffnsim.pl Reading resource file: 930110-950523.int.rsc +diffnsim.pl Reading resource file: radar_4rlks.hgt.rsc +diffnsim.pl Writing resource file: 930110-950523-sim_PRC_4rlks.int.rsc +diffnsim.pl Running diffnsim line 600+process_2pass.pl Making the deformation models for baseline reestimation +process_2pass.pl Filtering, making the mask, unwrapping +look.pl Checking I/O look.pl already done +look.pl Checking I/O Creating 930110-950523_4rlks.amp Creating 930110-950523_4rlks.amp.rsc +look.pl Wrote new rscfile +look.pl Using lookdown routine +int2filtmaskunwrap.pl Filtering +filter.pl Checking I/O Creating filt_930110-950523-sim_PRC_4rlks.int Creating filt_930110-950523-sim_PRC_4rlks.int.rsc +filter.pl Filtering line 600+filter.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/psfilt 930110-950523-sim_PRC_4rlks.int filt_930110-950523-sim_PRC_4rlks.int 1425 0.5 *** weighted power spectrum interferogram filter v1.0 clw 19-Feb-97 *** #lines in the interferogram file: 648 line 600+int2filtmaskunwrap.pl Form unwrapping mask using phase covariance +replace_mag.pl cpx2mag_phs filt_930110-950523-sim_PRC_4rlks.int /dev/null phs 1425 line 600+replace_mag.pl rmg2mag_phs 930110-950523_4rlks.cor pwr /dev/null 1425 line 600+replace_mag.pl mag_phs2cpx pwr phs filt_930110-950523-sim_PRC_4rlks.int 1425 line 600+make_mask.pl Checking I/O Creating phase_var_PRC_4rlks.msk Creating phase_var_PRC_4rlks.msk.rsc +make_mask.pl Creating the Mask for Unwrapping +make_mask.pl cpx2mag_phs filt_930110-950523-sim_PRC_4rlks.int pwr phs 1425 line 600+make_mask.pl phase_slope filt_930110-950523-sim_PRC_4rlks.int phasegrd.cpx 1425 5 0 *** phase gradient in range and azimuth with threshold v1.0 clw 4-nov-96 *** #lines in the interferogram file: 648 processing window, xmin,xmax,ymin,ymax: 0 1424 0 647 processing window size, width, height: 1425 648 window size size: 5 phase gradient correlation threshold: 0.0000 # correlation weights (range,azimuth): 5 5 indices,radius,weight: -2.50 -2.50 3.536 0.135 indices,radius,weight: -2.50 -1.50 2.915 0.257 indices,radius,weight: -2.50 -0.50 2.550 0.353 indices,radius,weight: -2.50 0.50 2.550 0.353 indices,radius,weight: -2.50 1.50 2.915 0.257 indices,radius,weight: -1.50 -2.50 2.915 0.257 indices,radius,weight: -1.50 -1.50 2.121 0.487 indices,radius,weight: -1.50 -0.50 1.581 0.670 indices,radius,weight: -1.50 0.50 1.581 0.670 indices,radius,weight: -1.50 1.50 2.121 0.487 indices,radius,weight: -0.50 -2.50 2.550 0.353 indices,radius,weight: -0.50 -1.50 1.581 0.670 indices,radius,weight: -0.50 -0.50 0.707 0.923 indices,radius,weight: -0.50 0.50 0.707 0.923 indices,radius,weight: -0.50 1.50 1.581 0.670 indices,radius,weight: 0.50 -2.50 2.550 0.353 indices,radius,weight: 0.50 -1.50 1.581 0.670 indices,radius,weight: 0.50 -0.50 0.707 0.923 indices,radius,weight: 0.50 0.50 0.707 0.923 indices,radius,weight: 0.50 1.50 1.581 0.670 indices,radius,weight: 1.50 -2.50 2.915 0.257 indices,radius,weight: 1.50 -1.50 2.121 0.487 indices,radius,weight: 1.50 -0.50 1.581 0.670 indices,radius,weight: 1.50 0.50 1.581 0.670 indices,radius,weight: 1.50 1.50 2.121 0.487 sum of unnormalized weights: 13.578 normalized window coefficients: indicies,weight: 0 0 0.010 indicies,weight: 0 1 0.019 indicies,weight: 0 2 0.026 indicies,weight: 0 3 0.026 indicies,weight: 0 4 0.019 indicies,weight: 1 0 0.019 indicies,weight: 1 1 0.036 indicies,weight: 1 2 0.049 indicies,weight: 1 3 0.049 indicies,weight: 1 4 0.036 indicies,weight: 2 0 0.026 indicies,weight: 2 1 0.049 indicies,weight: 2 2 0.068 indicies,weight: 2 3 0.068 indicies,weight: 2 4 0.049 indicies,weight: 3 0 0.026 indicies,weight: 3 1 0.049 indicies,weight: 3 2 0.068 indicies,weight: 3 3 0.068 indicies,weight: 3 4 0.049 indicies,weight: 4 0 0.019 indicies,weight: 4 1 0.036 indicies,weight: 4 2 0.049 indicies,weight: 4 3 0.049 indicies,weight: 4 4 0.036 processing line: 640 output lines: 648 +make_mask.pl phase_mask filt_930110-950523-sim_PRC_4rlks.int phasegrd.cpx sigma 1 1425 5 5 #lines in the interferogram file: 648 processing window, xmin,xmax,ymin,ymax: 0 1424 0 647 processing window size, width, height: 1425 648 # correlation weights (range,azimuth): 5 5 indices,radius,weight: -2 -2 0.111 indices,radius,weight: -2 -1 0.222 indices,radius,weight: -2 0 0.333 indices,radius,weight: -2 1 0.222 indices,radius,weight: -2 2 0.111 indices,radius,weight: -1 -2 0.222 indices,radius,weight: -1 -1 0.444 indices,radius,weight: -1 0 0.667 indices,radius,weight: -1 1 0.444 indices,radius,weight: -1 2 0.222 indices,radius,weight: 0 -2 0.333 indices,radius,weight: 0 -1 0.667 indices,radius,weight: 0 0 1.000 indices,radius,weight: 0 1 0.667 indices,radius,weight: 0 2 0.333 indices,radius,weight: 1 -2 0.222 indices,radius,weight: 1 -1 0.444 indices,radius,weight: 1 0 0.667 indices,radius,weight: 1 1 0.444 indices,radius,weight: 1 2 0.222 indices,radius,weight: 2 -2 0.111 indices,radius,weight: 2 -1 0.222 indices,radius,weight: 2 0 0.333 indices,radius,weight: 2 1 0.222 indices,radius,weight: 2 2 0.111 sum of unnormalized weights: 9.000 processing line: 640 output lines: 648 +make_mask.pl mag_phs2cpx pwr sigma phase_var_PRC_4rlks.int 1425 line 600+make_mask.pl int_thr phase_var_PRC_4rlks.int phase_var_PRC_4rlks_thresh.int 1425 5e-05 +make_mask.pl cpx2mag_phs phase_var_PRC_4rlks_thresh.int /dev/null phase_var_PRC_4rlks_thresh 1425 line 600+make_mask.pl add_phs phase_var_PRC_4rlks_thresh phs final_mask 1425 648 0 1 +make_mask.pl mag_phs2rmg pwr final_mask phase_var_PRC_4rlks.msk 1425 line 600+int2filtmaskunwrap.pl Unwrapping +new_cut.pl Checking I/O Creating filt_930110-950523-sim_PRC_4rlks_cut.flg Creating filt_930110-950523-sim_PRC_4rlks_cut.flg.rsc +new_cut.pl Reading resource file: filt_930110-950523-sim_PRC_4rlks.int.rsc +new_cut.pl Writing resource file: filt_930110-950523-sim_PRC_4rlks_cut.flg.rsc +new_cut.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/residue filt_930110-950523-sim_PRC_4rlks.int filt_930110-950523-sim_PRC_4rlks_cut.flg 1425 0 1425 0 648 cannot open output flag file, creating new file: filt_930110-950523-sim_PRC_4rlks_cut.flg insufficient #lines in the file, resetting length: 647 file has insufficient width, resetting width: 1424 initializing flag array... processing line 600 number of positive residues: 8776 number of negative residues: 8777 total number of residues: 17553 fraction residues: 0.01901 writing flag array... +new_cut.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/trees filt_930110-950523-sim_PRC_4rlks_cut.flg 1425 64 1 0 1425 0 648 *** connection trees (ARW) v2.0 8-aug-94 par/clw *** #lines in the file: 648 insufficient #lines in the file, ymax: 647 +unwrap.pl Checking I/O Creating filt_930110-950523-sim_PRC_4rlks_c10.flg Creating filt_930110-950523-sim_PRC_4rlks_c10.flg.rsc Creating filt_930110-950523-sim_PRC_4rlks_c10.unw Creating filt_930110-950523-sim_PRC_4rlks_c10.unw.rsc +unwrap.pl reading resource file: filt_930110-950523-sim_PRC_4rlks.int.rsc +unwrap.pl doing the correlation mask +unwrap.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/corr_flag phase_var_PRC_4rlks.msk filt_930110-950523-sim_PRC_4rlks_c10.flg 1425 0.1 1 0 1425 0 648 +unwrap.pl unwrapping +unwrap.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/grass filt_930110-950523-sim_PRC_4rlks.int filt_930110-950523-sim_PRC_4rlks_c10.flg filt_930110-950523-sim_PRC_4rlks_c10.unw 1425 1 0 1425 0 648 712.5 324 # interferogram lines: 648 insufficient #lines in the file, ymax: 647 array width,height (x,y), starting line: 1425 648 0 initial seed location (x,y): 712 324 initializing phase array values... reading flag file... actual seed location (x,y): 712 324 ping-pong interation, list size 1000 116: total ping-pong interations 1035 fraction of the image unwrapped: 0.92204 writing output file... output line: 600+process_2pass.pl Baseline Re-estimation +add_rmg.pl Checking I/O Creating low_cor_PRC_4rlks.msk Creating low_cor_PRC_4rlks.msk.rsc +add_rmg.pl Adding back +add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/add_rmg phase_var_PRC_4rlks.msk \ filt_930110-950523-sim_PRC_4rlks_c10.unw \ low_cor_PRC_4rlks.msk \ 1425 \ 648 \ 0 \ 1 +add_rmg.pl Checking I/O Creating baseest_4rlks.msk Creating baseest_4rlks.msk.rsc +add_rmg.pl Adding back +add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/add_rmg low_cor_PRC_4rlks.msk \ radar_PRC_4rlks.unw \ baseest_4rlks.msk \ 1425 \ 648 \ 0 \ 1 +add_rmg.pl Checking I/O Creating total_930110-950523_4rlks.unw Creating total_930110-950523_4rlks.unw.rsc +add_rmg.pl Adding back +add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/add_rmg filt_930110-950523-sim_PRC_4rlks_c10.unw \ radar_PRC_4rlks.unw \ total_930110-950523_4rlks.unw \ 1425 \ 648 \ 1 \ 1 +phase2base.pl Checking I/O Creating phase2base.out +phase2base.pl Reading resource file: 930110-950523_cull.off.rsc +phase2base.pl Reading resource file: radar_4rlks.hgt.rsc +phase2base.pl Reading resource file: pha4baseest.unw.rsc +phase2base.pl Writing baseest input_file: phase2base.in with QUAD fit +phase2base.pl write_baseline.pl 930110_950523_baseline.rsc SIM -21.976747856903547 5.26246646148610463E-005 4.27567829980748345E-011 -80.468966970788784 1.79813767956141829E-005 -2.23862481431585996E-011 +process_2pass.pl Use Bsim to re-remove topo from unwrapped pair +process_2pass.pl re-doing 2-pass (based on old unwrapped file!) +diffnsim.pl Checking I/O Creating 930110-950523-sim_SIM_4rlks.int Creating 930110-950523-sim_SIM_4rlks.int.rsc Creating radar_SIM_4rlks.unw Creating radar_SIM_4rlks.unw.rsc +diffnsim.pl Reading resource file: 930110-950523.int.rsc +diffnsim.pl Reading resource file: radar_4rlks.hgt.rsc +diffnsim.pl Writing resource file: 930110-950523-sim_SIM_4rlks.int.rsc +diffnsim.pl Running diffnsim line 600+process_2pass.pl Create tobegeocoded=filt_930110-950523-sim_SIM_4rlks_c10.unw file +add_rmg.pl Checking I/O Creating filt_930110-950523-sim_SIM_4rlks_c10.unw Creating filt_930110-950523-sim_SIM_4rlks_c10.unw.rsc +add_rmg.pl Adding back +add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-110808-1443/installs/gfortran/bin/add_rmg total_930110-950523_4rlks.unw \ radar_SIM_4rlks.unw \ filt_930110-950523-sim_SIM_4rlks_c10.unw \ 1425 \ 648 \ -1 \ 1 +process_2pass.pl Geocoding +radar2geo.pl Making mapping file +make_geomap.pl Checking I/O Creating /Users/insar/Downloads/TEST_DIR/GEO/geomap_4rlks.trans.rsc Creating /Users/insar/Downloads/TEST_DIR/GEO/geomap_4rlks.trans +make_geomap.pl Reading resource file: filt_930110-950523-sim_SIM_4rlks_c10.unw.rsc +make_geomap.pl Building ORRM file +make_geomap.pl Reading resource file: /Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem.rsc +make_geomap.pl Creating slope file +gradient.pl Checking I/O gradient.pl already done +make_geomap.pl Writing IntSim input_file: IntSim.in +make_geomap.pl IntSim IntSim.in > IntSim.out +make_geomap.pl Writing resource file: geomap_4rlks.trans.rsc +radar2geo.pl Geocoding filt_930110-950523-sim_SIM_4rlks_c10.unw +geocode.pl Checking I/O Creating geo_930110-950523.unw Creating geo_930110-950523.unw.rsc +geocode.pl Reading resource file: geomap_4rlks.trans.rsc +geocode.pl Reading resource file: filt_930110-950523-sim_SIM_4rlks_c10.unw.rsc +geocode.pl Writing resource file: geo_930110-950523.unw.rsc +process_2pass.pl That's all folks